SMSCOM Nutrimatic MK2 Digital Irrigation Timer - 4 A / 1000 watts
The Nutrimatic is an easy-to-program seconds timer for watering plants. It features 19 pre-programmed watering events and offers two day-cycle settings: 12 or 18 hours. Simply select the required day cycle and set the duration of each watering event between 0 and 99 seconds.
Do not leave the Nutrimatic powered continuously. Switch it on when the lights come on using a separate timer. At the end of the day, use the timer to switch the Nutrimatic off again. The Nutrimatic restarts its programme each time it is switched on, but the selected watering duration remains stored in its memory.
Setup
- Plug the Nutrimatic into a wall socket or a socket controlled by an external timer. The digital display will light up.
- Use the seconds setting to select how many seconds the pump should run during each watering event. The most recently selected duration is automatically stored in the memory. Once the duration has been set, the display backlight switches off and flashes during each watering event.
- Select the required cycle: 12 or 18 hours.
- Plug the pump into the socket on the Nutrimatic.
Please note: The first watering event starts as soon as power is supplied to the Nutrimatic.
Pre-programmed watering events
The Nutrimatic is pre-programmed. After each watering event, it counts down to the next watering event according to the schedule below.
| 18-hour cycle |
| Number of watering events |
Interval between watering events |
| 2 |
15 minutes |
| 5 |
30 minutes |
| 9 |
60 minutes |
| 3 |
120 minutes |
| 12-hour cycle |
| Number of watering events |
Interval between watering events |
| 8 |
15 minutes |
| 6 |
30 minutes |
| 2 |
60 minutes |
| 2 |
120 minutes |
| 1 |
60 minutes |
Technical specifications
- Maximum switching capacity: 1000 watts
- Mains voltage: 230/240 V
- Frequency: 50 Hz
