TRINATECH WF-40R WALL FAN WITH REMOTE 40CM / 16INCH

Like to have a fan, but don't have space to place it? Then the TRINATECH WF-40R is the fan for you. This professional 40cm wall fan with infrared remote control, can easily be hanged on any wall.

The TRINATECH WF-40R is ideal for the workshop, fitness clubs, store's, classrooms, offices and other places where there is limited free floor or table space.

This energy-efficient model comes with a remote control and a 7.5 hour timer so you can provide yourself with a cool breeze in a second! This solid fan has a protective metal gard with an impact resistant plastic grille on the rear and a chemical-resistant polypropylene propeller, the fancan swing 90 degrees or be locked in a stationary position to your liking.

Features:

• Elegant design;
• Super quiet motor;
• Variable speed and tilt function;
• Oscillating (turn) function;
• Three different ventilation modes (Normal, Natural wind or Hibernate);
• Delivered with remote control;
• Electronic timer for 30 minutes to 7½ hours;
• Easy assembly.

The TRINATECH WF-40R wall fan features is RoHS and CE approved and is supplied with a 2 meter powercord and grounded powerplug.

Usage:

Operation via the infrared remote control:

• MODE: The fan has three different modes, Normal, Natural wind and Sleep mode. Each mode works differently:
  • NOR: Normal mode has three speeds - Hi, Medium and Low;
  • NAT: Natural Breeze (wind) mode has three speeds are the same as the normal mode, but they have a different function. This mode will simulate a breeze by generating the desired speed then slow down to a very low speed and then re-accelerate to the desired speed and this constantly;
  • SLP: Sleep mode operates in the same way as the natural Breeze state, but slows down to a lower rate after a certain period of time. During sleep mode, the speed changes as follows:
    • HIGH: The fan operates for 30 minutes as the natural wind mode at high speed and then 30 minutes as the natural wind at medium speed mode, and then as a natural wind mode at low speed for the rest of the time that the fan is turned on;
    • MEDIUM: The fan operates for 30 minutes as the natural wind at medium speed mode, and then when the natural wind mode at low speed for the rest of the time in which the fan is turned on;
    • LOW : The fan runs continuously in the natural wind mode at low speed.
• ON / SPEED: Press the ON button. The first time you use the fan (Connect to a socket) it will turn on at low speed. If the fan had already been connected, it will start to run at the same speed as last set speed before it was turned off. After switching on the ventilator this button is also for setting the speed. Press this button and you can choose from "LO-MED HI" (Low-Medium-High);
• OFF: Press the OFF button to turn off the ventilator;
• TIMER: Press to adjust the timer setting. With every press the time increases with 30-minute increments, the maximum timer setting is 7.5 hours. For example, to set the timer for 5 hours, repeatedly pressing the timer button until the signs "1h" and "4u" simultaneously illuminated. Do not press the Timer button to turn on the fan indefinitely - the timer indicators will not light if the timer button is not pressed;
• SWING: When you press this button, the wallfan wil swing from left to right and back. Press the SWING button again to keep the fan in a fixed position. The fan will only pivot when the SWING button is pressed. Note that you can not manually adjust the swivel mechanism, it could damage the fan.

Note: The remote uses 2 x AAA batteries, which are not included and must be ordered separately.

The control panel on the fan is equipped with ON / SPEED SWING and OFF buttons. Via the function keys on the wall fan Timer and the different modes can not be controlled.

Controle via the buttons on the wall fan:

• SWING: When you press this button, the wallfan wil swing from left to right and back. Press the SWING button again to keep the fan in a fixed position. The fan will only pivot when the SWING button is pressed. Note that you can not manually adjust the swivel mechanism, it could damage the fan;
• ON / SPEED: Press the ON button. The first time you use the fan (Connect to a socket) it will turn on at low speed. If the fan had already been connected, it will start to run at the same speed as last set speed before it was turned off. After switching on the ventilator this button is also for setting the speed. Press this button and you can choose from "LO-MED HI" (Low-Medium-High);
• OFF: Press the OFF button to turn off the ventilator.