Vents Boost-I 200 EC Un Mixed-Flow In-Line Fan Ø 200 MM - 1210 M³ (Temperature Control / Sound Insulated)

The VENTS Boost-I 200 EC Duct Fan features a special sound-insulating casing that ensures very quiet operation and excellent aerodynamic properties. The VENTS Boost-I 200 EC has Ø 200 mm connections and a capacity of 1210 m³ per hour. 

In a single system, multiple duct fans can be installed in parallel to increase the output capacity or in series to increase the working pressure.

The Vents Boost-I EC duct fans combine the versatility and excellent performance of both axial and centrifugal fans, producing a powerful airflow and high pressure while retaining the characteristic energy efficiency and responsiveness of EC motors.

Multiple fans can be integrated into one computer-controlled system with sensor feedback combined with speed control across the entire dynamic range.

Application
Combined supply and exhaust ventilation systems for various commercial and industrial spaces with stringent noise requirements (such as libraries, conference rooms, classrooms, kindergarten playrooms, etc.).

Design
The external casing is made of galvanized steel. Sound and heat insulation is provided by 30 mm acoustic material. Due to the improved mixed flow impeller, which is a hybrid of axial and centrifugal impeller, the Boost-I EC has low power consumption and noise level with high performance. The specially designed diffuser, impeller and airflow rectifier at the fan outlet provide smooth air flow distribution and enable the best combination of high air flow, increased pressure, and low noise. The fan casing is equipped with an airtight terminal box for connection to power mains.

Motor
The fans are equipped with highly efficient electronically commutated EC motors. These state-of-the-art motors are the most advanced solution in energy efficiency today. EC motors are characterized with high performance and optimum control across the entire speed range. In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.

Speed control
The fan is controlled using a 0-10 V control signal. When the control signal value changes, the EC fan changes its rotation speed and provides air flow required for the ventilation system.

Optional
Several fans can be integrated into a single computer-driven control system. Custom designed software provides high accuracy control of the fans integrated into a network. The computer display shows all the system parameters, and the operation mode can be set individually for each fan in the network.

Mounting
The fans are designed to be used with round air ducts. The fan casing has mounting brackets for convenient installation onto the ceiling. The ducts can be fitted at any angle relative to the fan axis. Make sure to provide sufficient maintenance access during fan installation.
Electrical connection and installation must be performed in accordance with the instruction manual and the electrical connections diagram applied to the terminal box.
A single system may have several fans installed in parallel to boost the output capacity or in series to boost the working pressure.

Features:

• Equipped with a speed controller with an electronic thermostat and a temperature sensor attached to a 4-meter cable.
• Temperature-controlled operating logic.
• Power cord with grounded plug.

Technical Specifications:

• Boost-I EC Design: Mixed-Flow.
• Voltage: 230 Volts,
• Maximum current: 0.96 A,
• Maximum wattage: 121 Watts.
• Frequency: 50 Hz.
• Housing protection class: IP X4.
• Motor protection class: IP 20.
• Sound insulated: Yes.
• Heat insulated: Yes.
• Duct connection: Ø 200 mm.
• Air displacement when mounted: 1210 m³.
• Speed [min-1]: 3100 rpm.
• Noise level at 3m [dBA]: 47.
• Transported air temperature [°C]: -25...+55.
• Total length: 739 mm.
• Length between flanges: 601 mm.
• Diameter of duct fan: Ø 281 mm.
• Flange diameter: Ø 199 mm.
• Weight: 8.2 kg.